The Raspberry Pi has a Broadcom BCM2835 system on a chip (SoC), which includes a 700MHz ARM11 processor (The firmware includes a number of "Turbo" modes so that the user can attempt overclocking, up to 1 GHz, without affecting the warranty), VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded to 512MB. It does not include a built-in hard disk or SSD, but uses an SD card for booting and long-term storage. The Foundation's goal is to offer two versions, priced at US$25 and US$35. The Foundation started accepting orders for the higher priced model B on 29 February 2012, and the lower cost model A on 4 February 2013.Python as the main programming language, with support for BBC BASIC, C, and Perl. On 17 December 2012 the Raspberry Pi Foundation, in collaboration with IndieCity and Velocix, opened the "Pi Store", as a "one-stop shop for all your Raspberry Pi (software) needs". Using an application included in Raspbian, users can browse through several categories and download what they want. Software can also be uploaded for moderation and release.
How it came about
The original idea in 2006 was a response to the gradual drop in computing skills seen in students applying for computing degrees at Cambridge. Everyone knew how to use Microsoft Word, PowerPoint, Excel, Access; they didn't know much about coding, though, or what actually happened inside the machine.
Those familiar with schools in the 1980s will know they were full of BBC Micro computers, and everyone learnt how to write programs in BASIC. Computer games back then ran on computers that were practically built for coding, and plenty of amateur enthusiasts now work in the computer science industry. Sadly, as computers have become more complicated, school lessons have changed to train students in simple computer usage, without understanding what goes on underneath. The sheer complexity and expense of computers also means that kids aren't encouraged to fiddle with them, and purpose-built games consoles now dominate where Sinclair ZXs, Amstrads and Commodore Amigas once stood.
Thus, the solution: make a cheap but very capable computer that can be used in classrooms, that can be replaced easily if broken, and that lets you play with computer code whether at school or at home. Make it so it plugs into the TV at home, like computers used to do.
Raspbian is a Debian variant based on the ARM hard-float (armhf)-Debian 7 'Wheezy' architecture port but optimised for the ARMv6 instruction set of the Raspberry Pi hardware. Raspbian provides over 35,000 available deb packages pre-compiled for easy installation on a Raspberry Pi computer, specifically tuned for optimal performance on the Raspberry Pi ARM11 hardware. The Raspbian distribution basically contains the LXDE desktop environment, the Openbox window manager, the Midori web browser, software development tools and example source code for multimedia functions. Raspbian is a project of a small, dedicated team of developers, and is not affiliated with the Raspberry Pi Foundation.
We'll be installing the Raspbian Server Edition (RSEv2.2) on our Pi, which is a stripped down version of Raspbian with other software packages bundled as compared to the usual desktop-oriented Raspbian distribution. In total, 242 software packages were removed from the original version of Raspbian.
- My page on eLinux.org
- Analog Inputs for Raspberry Pi Using the MCP3008
- How to configure I2C
- RPi schematics
- RPi Hub
- RPi Tutorials
- How to use your Raspberry Pi like an Arduino
- Wiring Pi
- Measuring Tilt Angle with Gyro and Accelerometer
- How to set up a ad-hoc network with the Raspberry Pi
- Pharo on the Pi
- Testing out e-paper options for the Pi
- Docker on Raspberry Pi - by Resin
- Docker in Raspberry Pi - by Hypriot
- Alex Ellis' Docker ARM one-stop shop
rPi Docker images
Adding external drives to be mounted on boot in the Pi seems to be a bit dodgy sometimes, I've been having problems with transfers of large data freezing after a few minutes and then the drive finally being remounted in read-only. I didn't get the errors from the log unfortunately, but so far I've found nofail,noatime 0 0 seems to give the best results for an external mechanical 2.5" disk (defaults, 0 2 was not good).
This problem was a power supply issue as syslog is showing a lot of under voltage warnings, when using a 1A cellphone charger, I tried a 3.1A "fast charger" from an African on the street which worked a bit better, but still ran nto the same problem. Eventually I found that you need to use an official Raspberry Pi power supply because they have 5.1v output to account for this voltage drop that happens regardless of the current your power supply produces.
Pi based projects
- Onion Pi - TOR on Pi
- Snips - the first Private by Design voice assistant that runs on your Raspberry Pi
- pi-hole - network-wide ad blocking
- Kano OS - Kids OS for Raspberry Pi
- Charge controller project
- Raspberry Pi Foundation
- Introducing the Raspberry Pi
- Arduino with linux
- Quake III bounty: we have a winner!
- Jetson TK1 Development Kit
- Installing Ethereum on the Raspberry Pi - see also Ethereum
- Raspberry Pi Zero: the $5 computer
- CHIP vs Pi Zero
- Headless Pi
- Some bad points about the Pi
- Software solution to harden against spontaneous power loss
- Hardware solution to harden against spontaneous power loss
- Other more powerful options for a similar cost
- Backing up and restoring the SDcard
- Another tiny computer