Difference between revisions of "Xbox"
m (add cat) |
m (→Game controllers) |
||
| Line 39: | Line 39: | ||
*[http://gamespyarcade.com/tunnel/ GameSpyTunnel] | *[http://gamespyarcade.com/tunnel/ GameSpyTunnel] | ||
==Game controllers== | ==Game controllers== | ||
| − | These are just USB 1.1 with an extra yellow wire that carries a CMOS level hsync signal for light guns. Because the ports use the older USB protocol, they'll probably be useless for playing video or music directly from a flash device as the 12mbit max data rate is too low when you consider the | + | These are just USB 1.1 with an extra yellow wire that carries a CMOS level hsync signal for light guns. Because the ports use the older USB protocol, they'll probably be useless for playing video or music directly from a flash device as the 12mbit max data rate is too low when you consider the actual data rate may vary wildly within this range. |
*[http://www.xbox-linux.org/wiki/Xbox_Linux_USB_HOWTO#USB_in_general USB on xBox] | *[http://www.xbox-linux.org/wiki/Xbox_Linux_USB_HOWTO#USB_in_general USB on xBox] | ||
[[Category:Nad]][[Category:Hardware]] | [[Category:Nad]][[Category:Hardware]] | ||
Revision as of 23:03, 1 December 2007
Contents
Softmodding
- XboxScene - Softmodding for absolute beginners
- XboxScene - Using a USB stick to transfer gamesave exploits
- TechFreaks - Modding the Xbox in 10 Minutes
- TechFreaks - Installing a Larger Hard-Drive into a Modded Xbox
- EuroGamer - Razz's fool proof Xbox softmod guide
- AfterDawn - How to get on xbox live with softmod
- Biline - UXE softmod Installation Tutorial
TSOP Flashing
- Biline - TSOP Flashing Tutorial
- Xbox-Linux.org: TSOP flashing HOWTO
- How to find your Xbox version from Serial Number (mine's a 1.3)
HotSwapping
The hot-swap method allows modding via direct access to the Xbox hard-drive and it doesn't require any special hardware or specific Xbox software like "Action Replay". Here's what you will need to softmod with hot-swapping (taken from tutorial here):
- An xbox
- Access to your hdd. via hotswapping to a pc.
- xbox hdm (Used in this guide)
- Uxe complete (xbins)
- knowlege with xbins, you are going to need it!!!!!!!
First thing you will want to do is read the 'readme' in UXE complete. Open the support folder in this package. For the sake of confusion, we will ONLY run 71-fonts-install.bat, then nkpatcher-06-install.bat. THIS IS COMPLETLY NECESSARY (note this is different for LARGER HDDs, refer to the readme)
Now open the Linux folder in xbox HDM. You will see a C, and E, folder among others. Open the C: folder and copy all the contents of UXE complete's 'uxe-c-replace' folder. Then open HDM's E folder, and copy UXE Complete's E/ 'root' folder to xbox HDM's E: folder. Now open the xbox HDM folder, and double click 'make-iso-win'. This will create an iso burnable to a cd with DVD DECRYPTOR (or another program that burns isos)
Now you will want to do gain acces to xboxhdm with the xbox hd's hotswapped to the pc. The first thing we will do is hit 1 then enter. You will see a penguin and a bunch of text. assuming you hotswapped correctly, type 'xboxhd'. it will ask you yes or no. and obviously you will say yes. Now its time to rebuild your HDD. If you dont care about your gamesaves or music thats on your hdd, go to 'rebuild xbox hd from scratch' if you do, go to 'rebuild xbox c partition' and after you do go to xbrowser and copy the root file over to the xbox's E:.
Now for the easy part!!!!!! Turn Xbox off, count to 5; turn it back on with no disk in the DVD tray. This should have booted to a black screen with white text. Go to the first option.
Congrats!! you now have a modded xbox. You will be able to copy games, play emulators, run unsigned code, and an endless number of apps.
Connecting Xboxes over WAN without using XboxLive
Game controllers
These are just USB 1.1 with an extra yellow wire that carries a CMOS level hsync signal for light guns. Because the ports use the older USB protocol, they'll probably be useless for playing video or music directly from a flash device as the 12mbit max data rate is too low when you consider the actual data rate may vary wildly within this range.
