Difference between revisions of "Arcem"

From Organic Design wiki
(manual)
m (added links)
 
(2 intermediate revisions by one other user not shown)
Line 4: Line 4:
 
*[http://arcem.sourceforge.net/manual/arcem-1.50.html Arcem 1.5 manual]
 
*[http://arcem.sourceforge.net/manual/arcem-1.50.html Arcem 1.5 manual]
  
Converted the rpm to a deb with alien and installed with dpkg no problem, but not sure what to do from there yet...
+
Converted the rpm to a deb with alien and installed with dpkg no problem. Created the ~/.arcemrc and concatenated the four rom files for RISCOS-3.11, but then having an audio problem.
 
<source>
 
<source>
$ arcem --rom riscos3_71/risocs-3.71.rom
+
$ arcem
couldn't open config file: /root/.arcemrc
 
 
Could not open Extension Rom directory 'extnrom': No such file or directory
 
Could not open Extension Rom directory 'extnrom': No such file or directory
 
extnrom_size = 0, extnrom_entry_count= 0
 
extnrom_size = 0, extnrom_entry_count= 0
Line 15: Line 14:
 
HDC: Couldn't open image for drive 2
 
HDC: Couldn't open image for drive 2
 
HDC: Couldn't open image for drive 3
 
HDC: Couldn't open image for drive 3
No protocol specified
+
X visual: TrueColor 24bpp found, RGB shift/masks = 16/8, 8/8, 0/8
arcem: insisting on opening X display in DisplayKbd_InitHost().
+
couldn't open disc image FloppyImage0 on drive 0
 +
inserting floppy image FloppyImage0 into drive 0: couldn't open disc image
 +
couldn't open disc image FloppyImage1 on drive 1
 +
inserting floppy image FloppyImage1 into drive 1: couldn't open disc image
 +
couldn't open disc image FloppyImage2 on drive 2
 +
inserting floppy image FloppyImage2 into drive 2: couldn't open disc image
 +
couldn't open disc image FloppyImage3 on drive 3
 +
inserting floppy image FloppyImage3 into drive 3: couldn't open disc image
 +
Could not open audio device /dev/dsp
 +
Could not initialise sound output - exiting
 
</source>
 
</source>
 +
 +
''' apt-get install osspd-alsa''' got the ''/dev/dsp'' device back but then... '''Could not read sample rate'''.
 +
 +
== See also ==
 +
* http://acorn.revivalteam.de/?site=Emulation
 +
* https://bitbucket.org/caliston/rpcemu-spoon-caliston/downloads/

Latest revision as of 23:19, 22 September 2019

Cone.png This article or section is a stub. Stubs are articles that have not yet received substantial attention from the authors. They are short or insufficient pieces of information and require additions to further increase the article's usefulness. The project values stubs as useful first steps toward complete articles.

Converted the rpm to a deb with alien and installed with dpkg no problem. Created the ~/.arcemrc and concatenated the four rom files for RISCOS-3.11, but then having an audio problem.

$ arcem
Could not open Extension Rom directory 'extnrom': No such file or directory
extnrom_size = 0, extnrom_entry_count= 0
SetUpCMOS: Could not open (hexcmos) CMOS settings file, resetting to internal defaults.
HDC: Couldn't open image for drive 0
HDC: Couldn't open image for drive 1
HDC: Couldn't open image for drive 2
HDC: Couldn't open image for drive 3
X visual: TrueColor 24bpp found, RGB shift/masks = 16/8, 8/8, 0/8
couldn't open disc image FloppyImage0 on drive 0
inserting floppy image FloppyImage0 into drive 0: couldn't open disc image
couldn't open disc image FloppyImage1 on drive 1
inserting floppy image FloppyImage1 into drive 1: couldn't open disc image
couldn't open disc image FloppyImage2 on drive 2
inserting floppy image FloppyImage2 into drive 2: couldn't open disc image
couldn't open disc image FloppyImage3 on drive 3
inserting floppy image FloppyImage3 into drive 3: couldn't open disc image
Could not open audio device /dev/dsp
Could not initialise sound output - exiting

apt-get install osspd-alsa got the /dev/dsp device back but then... Could not read sample rate.

See also