Difference between revisions of "Udev"
(→USB) |
(hotplug out udev in) |
||
| Line 1: | Line 1: | ||
| − | Hot plug is a complex collection of scripts to deal with hotplugging (and coldplugging) devices such as USB key drives, usb cameras and firewire drives | + | Hot plug is a complex collection of scripts to deal with hotplugging (and coldplugging) devices such as USB key drives, usb cameras and firewire drives. |
| − | + | So rather than use this very inefficient hack-job we'll use [[Wikipedia:Udev]] insted, which is much nicer. | |
| − | |||
| − | |||
| − | |||
== USB == | == USB == | ||
Revision as of 03:17, 16 August 2006
Hot plug is a complex collection of scripts to deal with hotplugging (and coldplugging) devices such as USB key drives, usb cameras and firewire drives.
So rather than use this very inefficient hack-job we'll use Wikipedia:Udev insted, which is much nicer.
USB
This document may be useful Mounting and unmounting removable devices in linux
USB devices live at /proc/bus/usb. When a device is plugged this file is updated. Here is an example of the file:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-386 uhci_hcd S: Product=Intel Corp. 82801AA USB S: SerialNumber=0000:00:1f.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0d7d ProdID=1300 Rev= 0.50 S: Product=USB2.0 FlashDisk S: SerialNumber=1D4402000054 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
This computer has only one external USB device plugged in (USB2.0 FlashDisk). The other entry is the host controler (Intel Corp. 82801AA USB).
Firewire and others
These should work in a similar way. The default scripts should detect and initialise the device, it is up to the user to mount the device on the file system. This is fine because it gives us control over how it is mounted and the path used.
Hotplugging and the Graphical User Interface
It is important to provide feedback to the user when they plug or unplug a device. It is suggested that both visual and audible feedback be provided where possible. The latency for plugging is about 1 second. For unplugging the response is almost immediate. The use of perl rather than shell scripts for the hotplug mechanisim would improve the performance further. The sounds used should be customisable and a small, well chosen selection will be provided by default.
