Difference between revisions of "Audio signal and RF switching"
From Organic Design wiki
(RF switching) |
(parts list) |
||
| Line 3: | Line 3: | ||
An RF switch with multiple audio and video inputs and a single audio/video output would allow the pc software to control which outputs are sent to the TV. In this way the remote control can be used to select from a number of existing video sources or the computer or TV. | An RF switch with multiple audio and video inputs and a single audio/video output would allow the pc software to control which outputs are sent to the TV. In this way the remote control can be used to select from a number of existing video sources or the computer or TV. | ||
| + | ==Parts list== | ||
| + | *Vero board | ||
| + | *rca sockets female pcb board mount (colours red, white, yellow) | ||
| + | ==Resources== | ||
*[http://zone.ni.com/devzone/cda/tut/p/id/2892 Good tutorial on RF switching considerations] | *[http://zone.ni.com/devzone/cda/tut/p/id/2892 Good tutorial on RF switching considerations] | ||
| + | *[http://www.fairchildsemi.com/pf/FM/FMS6501.html Switch components] | ||
Revision as of 00:25, 29 October 2006
Low noise RF switching is needed to allow multiple audio and video inputs switched by software. I have a TV with one video input. I already have a DVD player, so the use of a media center in this situation will not be very friendly because of the need to switch inputs manually.
An RF switch with multiple audio and video inputs and a single audio/video output would allow the pc software to control which outputs are sent to the TV. In this way the remote control can be used to select from a number of existing video sources or the computer or TV.
Parts list
- Vero board
- rca sockets female pcb board mount (colours red, white, yellow)
