Configure LAN

Configure LAN Organic Design procedure

Network interfaces

Typically when running on a LAN we'll have two LAN cards on the server with the following /etc/network/interfaces:

auto eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.254 auto eth1 iface eth1 inet static address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255

Firewall

The 192.168.0 subnet is on eth0 and connects to the Internet router (which should have no wireless on it), and the 192.168.1 subnet is on eth1 and connects to the internal LAN hub. These network interfaces must then be configured as a firewall which can be done by copying the firewall script to /etc/network/if-up.d/00-firewall so that it executes whenever the networking starts up. Don't forget to restart the networking after making changes with /etc/init.d/networking restart.

DHCP Server

A DHCP server should be installed to be authoritative on the internal (192.168.1) subnet, and should specify the gateway and DNS server as itself. First install it with apt-get install dhcp3-server, then add the following configuration to /etc/dhcp/dhcpd.conf:

ddns-update-style none; option domain-name-servers 192.168.1.1; default-lease-time 600; max-lease-time 7200; authoritative; log-facility local7; # External subnet subnet 192.168.0.0 netmask 255.255.255.0 { } # Internal subnet subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.50 192.168.1.200; option routers 192.168.1.1; option broadcast-address 192.168.1.255; option subnet-mask 255.255.255.0; }

Next

• Back to Install a new server#Next steps
• Configure DNS