Difference between revisions of "Turntable USB interface"
From Organic Design wiki
m (→References) |
m (→Microcontroller) |
||
| Line 15: | Line 15: | ||
==Microcontroller== | ==Microcontroller== | ||
*[http://www.arduino.cc/en/Main/Buy Arduino NG] AVR microprocessor board | *[http://www.arduino.cc/en/Main/Buy Arduino NG] AVR microprocessor board | ||
| + | *[http://www.arduino.cc/en/Guide/Board Schematics] | ||
===Features=== | ===Features=== | ||
*[http://www.atmel.com/dyn/resources/prod_documents/doc2545.pdf ATmega168 AVR processor] | *[http://www.atmel.com/dyn/resources/prod_documents/doc2545.pdf ATmega168 AVR processor] | ||
Revision as of 22:45, 28 January 2007
I would like to retro-fit my 1970's pioneer turntable to be able to record onto a iPod or other USB device.
Contents
Operation
- Plug in USB stick or iPod
- Press record-pause
- Place stylus on a chosen track
- Signal level threshold trigger changes to record when the stylus hits the record
- Sound file is written onto the device
- Signal level threshold trigger stops recording after a few seconds pause (manual pause provided also)
Systems
- Power supply
- Analogue phono stage (requires ±12V DC)
- Stepdown power supply to give 5V± 3A from the main turntable transformer
Microcontroller
- Arduino NG AVR microprocessor board
- Schematics
Features
- ATmega168 AVR processor
- Digital <-> Analogue converter
- C library and compiler supplied as open source
Operating system
- gcc, libc supplied and open source
- No real operating system required
- svn tree
- bootloader supplied and open source
- Program to modify iPod's XML playlist file to add the newly created track to the playlist
