New solar system
We made out first panels (2x75w) at the end of 2012, and then made another two 150w panels about a year later. These have served us very well, but we've finally decided to replace the whole set up with a completely new and more powerful system.
First I took all the old panels and structure down. The first pair of 75w panels were in pretty bad condition! one of them had stopped working completely, but amazingly the other was still putting out about 75% power even though all the wood was rotten and the cells were all broken! One of them disintegrated and fell when I was lowering it down with a rope, but luckily the glass didn't break. The second pair of 150w panels were still operating pretty well, but the glass in both of them was cracked, the first by super-hail and the second due to the roof and wood slowly bending out of shape.
The new set up involves 6x260w panels with a 1Kw charge-controller/inverter unit and two 240aH batteries. I had installed the controller and batteries a few days before, and after spending the whole morning removing the old installation from the roof, I only had time in the afternoon to get one pair of the new panels installed.
The new system seems to have some problems though. First I couldn't figure out how to attach the panels to the structure properly using the parts supplied - our panels are 35mm thick, but the clamps seem to only support 40mm panels even though the manual says they somehow support both. I've had to temporarily raise the panels up with a stack of washers until the people at the shop can explain the situation.
The other problems are with the inverter, it's web-page just shows zero for all the parameters, and the readings on the display of voltage and power don't match the readings we take directly from the panels with a multimeter. We're back in Caxias now and will be going to the shop soon to find some answers!
