Scan-subnet.pl

This little script uses nmap to give you a list of all the IP addresses in use on all the subnets on all active network interfaces on the host it is run on. It also gives the MAC address and a basic description for each as in the following example.

192.168.1.1 [00:21:29:08:91:44] Cisco-Linksys 192.168.1.2 [00:13:C0:03:12:A4] CompuLab 192.168.1.100 [00:02:D2:02:2E:D1] MacPower Peripherals 192.168.1.101 [00:07:6F:58:FF:29] Senao International Co. 192.168.1.102 [00:08:6F:58:FF:0C] Senao International Co. 192.168.1.151 [00:1E:09:48:AA:34] Dell

{{{1}}}