User:Saul/Open WRT

Setup Network Via SSH

When compiling Open WRT from source it may have no internet connectivity and the interface (LuCI) may not be installed.
Following the instructions from Open WRT's Docs we can connect via SSH:

uci set network.lan.ipaddr='192.168.2.200' # static address for this device
uci set network.lan.gateway='192.168.2.1' # Router ip
uci set network.lan.dns='192.168.2.1' # router dns or provider
uci commit
service network restart

Then LuCI can be installed.

opkg update
opkg install luci